|
|
Implementing of GSM modem in PBX Asterisk
Benýšek, Jiří ; Krajsa, Ondřej (referee) ; Šilhavý, Pavel (advisor)
Short Message Service (shortly SMS) is the most widely used type of communication systems. The main advantages are that allow a fast exchange of messages between devices, a very good availability through GSM and a reasonable price. Nowadays the SMS service support has expanded to include other technologies such as a service of the information navigation and the remote connection. The master‘s thesis concentrates on the Short Message Service, deals with basic principles and statements using by this service. The topic of the thesis is software PBX Asterisk and its possibility of SMS implementation, especially verification of SMS processing goes through the PSTN. After the basic introduction the master‘s work deals with the installation and configuration of the server. The main focus is on an installation of the operating system with an additional pack including necessary libraries and modules for a correct working of the server. The following section is paying attention to the Asterisk server configuration, especially a hardware card installation which is necessary for a connection with analog telephones, done by Bluetooth connections, set up user’s profiles of the SIP protocol and create a dial plan. This is followed by a verification of SMS option of the implementation and communication with GSM modem which is used as a gate for an exchange SMS between PSTN and GSM network. The last chapter of this master‘s thesis comes with the aimed results.
|
|
|
System with RC Model Servos
Kutěj, Jaromír ; Nosko, Svetozár (referee) ; Musil, Martin (advisor)
This thesis addresses the design of a movable RC model with a use of servo motors. It describes both the analysis of suitable hardware and a realization of the project with an emphasis on microcomputer controlled devices and technologies communication technologies with said devices. Furthermore, an interaction a interfacing with user is discussed. Based on findings a system is then implemented in form of a model of a car built atop of microcomputer, controlled wirelessly using a mobile application. This system is then enhanced by proximity sensors that prevent collisions by halting movement of the car.
|
|
| |
|
|
Internet of Things Device Based on Thread and 6LoWPAN
Piškula, David ; Nosko, Svetozár (referee) ; Musil, Petr (advisor)
Internet of Things is among the newest phenomena of information technologies. This work describes the evolution and future of the Internet of Things and provides an overview of its current applications, then summarize the communication interfaces and protocols usable for the creation of the Internet of Things. The main focus is put especially on the IEEE 802.15.4 standard, 6LoWPAN protocol and the Thread technology. It also explains the term of Cloud Computing, platforms that are providing it and related types of databases. The design, implementation and testing of a Thread based solution are part of this thesis.
|
|
|
Communication assembly for optical cableless linking
Kapuš, Martin ; Kovář, Jan (referee) ; Kolka, Zdeněk (advisor)
This Graduate Thesis is about communication module for optical wireless network. This device read data from RS232 port and two analog inputs and sends it through internet to a remote Computer. Furthermore allows voice communication between local user on module and user on remote computer. Device allows communication with standard headphones and microphone, or with Bluetooth handsfree. Basic part is microprocessor MCF5223 and Bluetooth Ezurio BISM II module. Control program has been written in C language. Printed circuit is created by EAGLE program. This device is managed via web interface and settings have been stored into EEPROM memory. Work contains description of separately parts and blocks, source code of program, description of source code and printed circuit designs.
|
|
|
Portable music player
Rozsíval, Adam ; Šotner, Roman (referee) ; Dřínovský, Jiří (advisor)
The thesis deals with the project of a portable music player with an amplifier in the class D. The device is powered up by connected power supply unit, eventually by built-in accumulator. Audio signal is played by bluetooth module, sound card or headphone output. Switching inputs and power supply of the accumulator is managed by a micro-controller. A correction equalizer for sound control is also embedded in the booster. All peripheries are put into a wooden baffle board. The sound is reproduced by a pair of loudspeakers.
|
|
|
FM Transmitter on Rasberry Pi
Kohoutek, Jan ; Bidlo, Michal (referee) ; Vašíček, Zdeněk (advisor)
Aim of this bachelor thesis is to desing and implement player, which will be able to play its own files in FM band. The player consists of transmitter based on Rapsberry Pi and mobile application that allows wireless control of this player. Technical report is divided into three main parts. The initial part describes technologies for transmission of audio signal in FM band. Followed by description of suggested solution and its implementation. Concluding part describes the designed prototype and assesment of its parameters.
|
|
| |
|
|
Analysis of Attacks with Mobile Device Pwn Phone
Holubec, Petr ; Malinka, Kamil (referee) ; Aron, Lukáš (advisor)
This thesis deals with the safety of wireless networks and used protocols. The aim is to describe chosen network attacks and demonstrate the feasibility of using the device Pwn Phone. It will also be implemented a system consisting of a mobile application and a server component allowing execution of NFC relay attack on contactless credit cards. System will be tested in real world and evaluation of the success in different conditions will also be part of the thesis.
|
|
|
Restaurant Menu for Mobile Phones with Bluetooth
Dzurňák, Tomáš ; Letko, Zdeněk (referee) ; Novosad, Petr (advisor)
The goal of this thesis is to design and implement an application for a mobile phone and a desktop computer, which provides ability to browse a restaurant menu and to make orders. The desktop computer provides information from the restaurant menu and manages new orders. The desktop application is able to communicate with more mobile phones simultaneously. The communications between the mobile phone and the computer is realized with Bluetooh wireless technology. The user interface of the mobile application is designed user-friendly and available in plenty languages. There are suggestions for future development of this project in the end.
|
guest ::
